아래의 파일을 열어서 계정을 추가한다.

# cat /var/adm/cron/cron.allow
root
adm
uucp
starlits

# ioscan -fun             --> list all devices, and their associated device files
# ioscan -funC disk       --> only list disk class devices and their device files
# ioscan -funC tape       --> only list tape drives and their device files
# ioscan -funH 2/0/1.6.0  --> only list device files for the device at 2/0/1.6.0

05/12 13:09:20 root@soafdb1
/$ ioscan -funC disk
Class     I  H/W Path        Driver   S/W State   H/W Type     Description
===========================================================================
disk      0  2/0/1/1/0.0.0   sdisk    CLAIMED     DEVICE       HP 73.4GST373453LC
                            /dev/dsk/c0t0d0     /dev/dsk/c0t0d0s2   /dev/rdsk/c0t0d0    /dev/rdsk/c0t0d0s2
                            /dev/dsk/c0t0d0s1   /dev/dsk/c0t0d0s3   /dev/rdsk/c0t0d0s1  /dev/rdsk/c0t0d0s3
disk      1  2/0/1/1/0.1.0   sdisk    CLAIMED     DEVICE       HP 73.4GMAS3735NC
                            /dev/dsk/c0t1d0   /dev/rdsk/c0t1d0
disk      2  2/0/2/1/0.0.0   sdisk    CLAIMED     DEVICE       HP 73.4GST373453LC
                            /dev/dsk/c2t0d0   /dev/rdsk/c2t0d0
..................
 
disk     27  2/0/6/1/0/4/0.8.0.22.0.2.5   sdisk    CLAIMED     DEVICE       HP      OPEN-V
                            /dev/dsk/c8t2d5   /dev/rdsk/c8t2d5
..................

/$ diskinfo /dev/rdsk/c8t2d5
SCSI describe of /dev/rdsk/c8t2d5:
             vendor: HP
         product id: OPEN-V
               type: direct access
               size: 20480640 Kbytes
   bytes per sector: 512

# bdf
Filesystem         kbytes     used     avail      %used   Mounted on
/dev/vg00/lvol3    20480000   9366488  11026728   46%     /
/dev/vg00/lvol1    311296     125128   184752     40%     /stand
/dev/vg00/lvol4    8192000    16872    8111272    0%      /var/adm/crash
/dev/vg02/lvol1    71663616   6012030  61548626   9%      /oracle
/dev/vg04/lvol1    71663616   14430780 53655816   21%     /backup
/dev/vg03/lvol1    71663616   34646    67152167   0%      /archive
/dev/vg13/lvol1    511115264  141743   479037683  0%      /DATA

# fstyp -v /dev/vg00/lvol3
vxfs
version: 5
f_bsize: 8192
f_frsize: 8192
f_blocks: 2560000
f_bfree: 1389189
f_bavail: 1378336
f_files: 483488
f_ffree: 347296
f_favail: 347296
f_fsid: 1073741827
f_basetype: vxfs
f_namemax: 254
f_magic: a501fcf5
f_featurebits: 0
f_flag: 16
f_fsindex: 9
f_size: 2560000

• 설정파일을 수정한다.

# vi /etc/rc.config.d/netconf

• INTERFACE_NAME의 숫자가 중복되어서는 안된다.

INTERFACE_NAME[0]="lan1"
IP_ADDRESS[0]="61.74.73.91"
SUBNET_MASK[0]="255.255.255.128"
BROADCAST_ADDRESS[0]=""
INTERFACE_STATE[0]=""
DHCP_ENABLE[0]=0
INTERFACE_MODULES[0]=""
 
# 추가한 정보
# 기존에 INTERFACE_NAME[1]이 없어야 한다. 대가로번호가 겹쳐서는 안된다.
INTERFACE_NAME[1]="lan1:1"
IP_ADDRESS[1]="61.74.73.93"
SUBNET_MASK[1]="255.255.255.128"
BROADCAST_ADDRESS[1]=""
INTERFACE_STATE[1]=""
DHCP_ENABLE[1]=0
INTERFACE_MODULES[1]=""
 
INTERFACE_NAME[2]="lan1:2"
IP_ADDRESS[2]="61.74.73.95"
SUBNET_MASK[2]="255.255.255.128"
BROADCAST_ADDRESS[2]=""
INTERFACE_STATE[2]=""
DHCP_ENABLE[2]=0
INTERFACE_MODULES[2]=""

• 설정파일을 적용한다.

# /sbin/init.d/net start

• (팁) 설정파일을 건드리지 않고, 임시적으로 적용하는 방법

# ifconfig lan1:3 192.168.200.200 netmask 255.255.255.0 up

soafdb2:/#fsadm -F vxfs /oracle
largefiles

• largefiles 가 아니면 파일당 2G로 제한된다.

1. 백업할 OS 상태를 확인한다.
2. DAT Tape을 넣는다.
3. 아래의 스크립트를 만들어서 돌린다.

# cat /tmp/os_backup.sh                                       
set -x
make_tape_recovery -x inc_entire=vg00
 
# nohup sh /tmp/os_backup.sh 

# swlist -l product > /tmp/list.txt

LANG=ko_KR.utf8
또는 LANG=ko_KR.eucKR

• HPRC
• ITRC
• 문서
• 소프트웨어 정보

• HP-UX System and Network Administration I
• HP-UX Performance and Tuning